для Cisco Cisco Packet Data Gateway (PDG)

Exec Mode show Commands (A-C)

show configuration ▀

Command Line Interface Reference, StarOS Release 18 ▄

4463

card

card_num

Specifies a card for which configuration information is to be displayed as an integer from 1 through 48 for the
ASR 5000 or 1 through 20 for the ASR 5500.

checksum

Generates and displays a checksum value for the configuration data.

context

name

Specifies an existing context for which configuration information is to be displayed as an alphanumeric string of 1
through 79 characters.

show configuration link-aggregation group

group_number

Displays the current configuration of the LAG. specified as an integer from 1 through 1023.

obsolete-encryption

Shows encrypted values using a weaker, obsolete encryption method (prior to release 12.2).

port

slot/port

Displays configuration information for a port identified by its slot and port numbers.

rohc [ all | profile-name

name

Specifies that information for all robust header compression (RoHC) profiles or the named profile is to be
displayed.

showsecrets

Displays encrypted and unencrytpted secret keys saved in the configuration. If this keyword is not specified,
secret keys are not displayed.

Important:

The showsecrets keyword is restricted to Administrator privilege or higher.

srp

Shows the Service Redundancy Protocol (SRP) configuration used for Interchassis Session Recovery (ICSR)
deployments.

url url

Default: configuration which is currently in use.
This keyword is not available to users with Operator level permissions. Specifies the location of the
configuration data to use for information display. The

url

may refer to a local or a remote file and must be

entered in the following format:
For the ASR 5000:

[ file: ]{ /flash | /pcmcia1 | /hd }[ /directory ]/file_name

tftp://{ host[ :port# ] }[ /directory ]/file_name

[ http: | ftp: | sftp: ]//[ username[ :password ]@ ] { host }[ :port# ][
/directory ]/file_name