для Cisco Cisco Packet Data Gateway (PDG)
Policy Control Configuration Mode Commands
diameter map ▀
Command Line Interface Reference, StarOS Release 18 ▄
8105
diameter map
This command enables selecting the value to which the USAGE_REPORT and APN_AMBR_MOD_FAILURE Event-
Trigger should be mapped to.
Trigger should be mapped to.
Product
All
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > IMS Authorization Configuration > Policy Control
Configuration
Configuration
configure > context context_name > ims-auth-service service_name > policy-control
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-imsa-dpca)#
Syntax
diameter map usage-report { 29 | [ 26 | 33 ] [ 26 | 33 ] }
default diameter map usage-report
usage-report { 29 | [ 26 | 33 ] [ 26 | 33 ] }
Maps the USAGE_REPORT of Event-Trigger AVP to one or a combination of these values.
26 – Event-Trigger 26 will mapped to USAGE_REPORT. Note this will not affect any other Event-
Trigger.
29 – Event-Trigger 29 will mapped to USAGE_REPORT, and 33 to APN_AMBR_MOD_FAILURE.
33 – Event-Trigger 33 will mapped to USAGE_REPORT, and 29 to APN_AMBR_MOD_FAILURE.
default
The default behavior is to configure the Event-Trigger USAGE_REPORT to be mapped to 26.
Usage
The Event-Trigger AVP’s USAGE_REPORT has been given different values in the 3GPP TS 29.212
standard spec. As a result of that, the releases of TS 29.212 are not backward compatible. To address this, this
CLI command has been introduced in Policy Control configuration mode to map the USAGE_REPORT to
either 26/29/33 or a combination of these values in order to be flexible enough to interoperate with various
operators.
standard spec. As a result of that, the releases of TS 29.212 are not backward compatible. To address this, this
CLI command has been introduced in Policy Control configuration mode to map the USAGE_REPORT to
either 26/29/33 or a combination of these values in order to be flexible enough to interoperate with various
operators.
TS 29.212 v9.5.0 - USAGE_REPORT (26)
TS 29.212 v9.6.0 - USAGE_REPORT (29)
TS 29.212 v9.7.0 - USAGE_REPORT (33)