для Cisco Cisco Packet Data Gateway (PDG)
S-GW Service Configuration Mode Commands
▀ accounting context
▄ Command Line Interface Reference, StarOS Release 18
8712
accounting context
Configures the GTPP accounting context and group selection for S-GW service.
Product
S-GW
SAEGW
Privilege
Administrator
Mode
Exec > Global Configuration > Context Configuration > S-GW Service Configuration
configure > context context_name > sgw-service service_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-sgw-service)#
Syntax
accounting context name [ gtpp group name ]
no accounting context
no
Removes the configured accounting context from this service.
context name
Specifies the context where GTPP accounting is performed.
name
must be an existing context configured on the system expressed as an alphanumeric string of 1 through
79 characters.
If an accounting context name is not configured in the S-GW service, the context where the S-GW service
resides is considered the accounting context and the default GTPP group is used.
If an accounting context name is not configured in the S-GW service, the context where the S-GW service
resides is considered the accounting context and the default GTPP group is used.
gtpp group
name
Specifies a GTPP group used to perform GTPP accounting.
name
must be an existing GTPP group configured on the system expressed as an alphanumeric string of 1
through 79 characters.
If a GTPP group is not configured, the system will use the default GTPP group in the specified accounting
context. If the accounting context is not specified, the system will use default GTPP group in the context
where the S-GW service resides.
If a GTPP group is not configured, the system will use the default GTPP group in the specified accounting
context. If the accounting context is not specified, the system will use default GTPP group in the context
where the S-GW service resides.
Usage
Use this command to specify the accounting context and/or GTPP accounting group the S-GW service will
use to perform GTPP accounting.
use to perform GTPP accounting.
Example
The following command specifies a GTPP accounting context named
acct-2
and a GTPP accounting group
named
gtpp-grp-3
as the context and group the S-GW service will use: