для Cisco Cisco Packet Data Gateway (PDG)
LTE Emergency Profile Configuration Mode Commands
▀ ue-validation-level
▄ Command Line Interface Reference, StarOS Release 18
7096
ue-validation-level
Configures the type of user equipment (UE) that can use the emergency bearer service through the profile.
Product
MME
Privilege
Administrator
Mode
Exec > Global Configuration > LTE Policy Configuration > LTE Emergency Profile Configuration
configure > lte-policy > lte-emergency-profile profile_name
Entering the above command sequence results in the following prompt:
[local]host_name(lte-emergency-profile)#
Syntax
ue-validation-level { auth-only | full | imsi | none }
default ue-validation-level
default
Returns the command to its default setting of “none”.
{ auth-only | full | imsi | none }
Specifies the type of UE allowed to use the emergency bearer service. Options are:
auth-only
: Specifies that UEs that have been authenticated are allowed to use the emergency bearer
service. These UEs may be in a limited service state in that they may be in an area with restricted
service or where they are restricted from services. Enabling this option also causes subscription and
location validation to be bypassed.
service or where they are restricted from services. Enabling this option also causes subscription and
location validation to be bypassed.
full
: Specifies that only UEs that have been authenticated and have successfully passed subscription
and location validation are allowed to use the emergency bearer service. Enabling this option
indicates that only UEs that are capable of normal attach procedures will be allowed to use the
emergency bearer service.
indicates that only UEs that are capable of normal attach procedures will be allowed to use the
emergency bearer service.
imsi
: Specifies that UEs with an International Mobile Subscriber Identity (IMSI) are allowed to use the
emergency bearer service regardless of authentication. Even if authentication fails, the UE is granted
access.
access.
none
: Specifies that all UEs are allowed to use the service. This is the default value for the command.
Usage
Use this command to indicate which UEs can use the emergency bearer service through this profile.
Example
The following command configures the type of UE allowed to use the emergency bearer service to “IMSI
required, authentication optional”:
required, authentication optional”:
ue-validation-level imsi