для Cisco Cisco Packet Data Gateway (PDG)
Route-map Configuration Mode Commands
match origin ▀
Command Line Interface Reference, StarOS Release 18 ▄
8367
match origin
Matches the origin code learned from BGP. This command is for route maps that are used with BGP routing only.
Product
HA
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > Route-map Configuration
configure > context context_name > route-map map_name { deny | permit }
seq_number
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-route-map)#
Syntax
[ no ] match origin { egp | igp | incomplete }
no
Disables matching of the origin code.
egp
Matches origins learned via the External Gateway Protocol (EGP)
igp
Match origins learned via the local Interior Glittery Protocol (IGP)
incomplete
Match origins with unknown heritage.
Usage
Use this command to match origin codes for BGP routing.
Example
To match origin codes learned from EGP, enter the following command:
match origin egp