для Cisco Cisco ASR 5700
Exec Mode Commands (D-S)
filesystem synchronize ▀
Command Line Interface Reference, StarOS Release 17 ▄
4059
filesystem synchronize
Use this command to synchronize the file systems of active and standby storage devices on management cards or VPC-
DI Control Function (CF) virtual machines.
DI Control Function (CF) virtual machines.
Product
All
Privilege
Security Administrator, Administrator, Operator
Mode
Exec
The following prompt is displayed in the Exec mode:
[local]host_name#
Syntax
For the ASR 5000:
filesystem synchronize [ /flash | /pcmcia1 | all ] [ checkonly ] [ from
card_num | to card_num ] [-noconfirm]
card_num | to card_num ] [-noconfirm]
For the ASR 5500:
filesystem synchronize [ /flash | /usb1 | all ] [ checkonly ] [ from
card_num | to card_num ] [-noconfirm]
card_num | to card_num ] [-noconfirm]
For VPC:
filesystem synchronize [ /flash | /usb1 | /usb2 | cdrom1 | all ] [
checkonly ] [ from card_num | to card_num ] [-noconfirm]
checkonly ] [ from card_num | to card_num ] [-noconfirm]
The following devices are supported based on platform type:
/flash – ASR 5x00, VPC
/hd-raid – ASR 5x00, VPC
/pcmcia1 – ASR 5000 only
/usb1 – ASR 5500, VPC (if configured via hypervisor)
/usb2 – VPC (if configured via hypervisor)
/cdrom1 – VPC (if configured via hypervisor)
all – Selects all file systems
checkonly
Checks for file system corruption; does not modify file systems.
[ from
card_num
| to
card_num
]
Copies files from a source card to a destination card specified by slot numbers.