для Cisco Cisco ASR 5700
LTE Emergency Profile Configuration Mode Commands
pgw ▀
Command Line Interface Reference, StarOS Release 17 ▄
6989
pgw
Statically configures a P-GW to support emergency bearer services for this profile.
Product
MME
Privilege
Administrator
Mode
Exec > Global Configuration > LTE Policy Configuration > LTE Emergency Profile Configuration
configure > lte-policy > lte-emergency-profile profile_name
Entering the above command sequence results in the following prompt:
[local]host_name(lte-emergency-profile)#
Syntax
pgw fqdn fqdn
pgw ip-address address protocol { both | gtp | pmip } weight value
no pgw { fqdn | ip-address address }
no fqdn
Removes the specified P-GW Fully Qualified Domain Name (FQDN) or IP address from this profile.
fqdn fqdn
Specifies the domain name of the P-GW as an alphanumeric string of 1 through 256 characters.
Important:
A maximum of one P-GW FQDN configuration is allowed per profile.
ip-address address
Specifies the IP address for the P-GW in IPv4 dotted-decimal or IPv6 colon-separated-hexadecimal notation.
Important:
A maximum of four P-GW IP address configurations are allowed per profile.
protocol { both | gtp | pmip }
Specifies the protocol the P-GW supports. Options are:
both
: Specifies that both the GTP and PMIP protocols are supported.
gtp
: Specifies that only GTP is supported.
pmip
: Specifies that only PMIP is supported.