для Cisco Cisco ASR 5700
Subscriber Configuration Mode Commands
loadbalance-tunnel-peers ▀
Command Line Interface Reference, StarOS Release 17 ▄
8775
loadbalance-tunnel-peers
Configures the load balancing of traffic bound for L2TP tunnels configured on the system for the selected subscriber.
Product
L2TP
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > Subscriber Configuration
configure > context context_name > subscriber { default | name subscriber_name }
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-subscriber)#
Syntax
loadbalance-tunnel-peers { balanced | prioritized | random }
loadbalance-tunnel-peers
Enables load balancing of L2TP traffic using one of the methods described below.
balanced
Enables the equal use of all configured tunnel peers (LNSs) for the selected subscriber.
prioritized
Enables the use of all configured tunnel peers (LNSs) for the selected subscriber based on the preference
number assigned to the peer address.
number assigned to the peer address.
random
Default: Enabled
Enables the random use of all configured tunnel peers (LNSs) for the selected subscriber.
Enables the random use of all configured tunnel peers (LNSs) for the selected subscriber.
Usage
Use to manage traffic loads on L2TP Access Concentrator (LAC) ports and their respective L2TP Network
Servers (LNSs).
Servers (LNSs).
Example
Use the following command to randomly use all configured tunnel peers (LNSs):
loadbalance-tunnel peers random