для Cisco Cisco ASR 5700
Subscriber Configuration Mode Commands
qos rate-limit ▀
Command Line Interface Reference, StarOS Release 17 ▄
8825
Example
The following command lowers the IP precedence when the committed-data-rate and the peak-data-rate are
violated in uplink direction:
violated in uplink direction:
qos rate-limit direction uplink violate-action lower-ip-precedence
The following command buffers the excess user packets when the subscriber traffic violates the configured
peak or committed data-rate bps in uplink direction. Once the peak/committed data rate for that subscriber
goes below the configured limit it transmit them. It also transmits them if buffer memory is full:
peak or committed data-rate bps in uplink direction. Once the peak/committed data rate for that subscriber
goes below the configured limit it transmit them. It also transmits them if buffer memory is full:
qos rate-limit direction uplink violate-action shape transmit-when-
buffer-full
buffer-full