для Cisco Cisco Packet Data Gateway (PDG)
Operator Policy Configuration Mode
▀ apn
▄ Command Line Interface Reference, StarOS Release 17
7400
apn
This command identifies an APN (access point name) and associates it with an APN profile (created separately in the
APN Profile Configuration mode).
APN Profile Configuration mode).
Product
MME
SAEGW
SaMOG
S-GW
SGSN
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Operator Policy Configuration
configure > operator-policy policy_name
Entering the above command sequence results in the following prompt:
[local]host_name(config-opr-policy-policy_name)#
Syntax
apn { default-apn-profile apn_profile_name | network-identifier apn_net_id [ apn-profile
apn_profile_name | congestion-control ] | operator-identifier apn_op_id apn-profile
apn_profile_name | webauth-apn-profile apn_webauth_name }
apn_profile_name | congestion-control ] | operator-identifier apn_op_id apn-profile
apn_profile_name | webauth-apn-profile apn_webauth_name }
no apn { default-apn-profile | network-identifier apn_net_id [ congestion-control ] |
operator-identifier apn_op_id | webauth-apn-profile apn_webauth_name }
operator-identifier apn_op_id | webauth-apn-profile apn_webauth_name }
no
Disables the specified APN to APN Profile correspondence.
default-apn-profile apn_profile_name
Enables the use of a default APN profile comprised of default values for all parameters. this profile will be
used when none of the configured APNs match the APN in the incoming Request.
used when none of the configured APNs match the APN in the incoming Request.
apn_profile_name
must be an alphanumeric string of 1 through 64 characters.
apn-profile apn_profile_name
apn_profile_name
must be an alphanumeric string of 1 through 64 characters.
network-identifier apn_net_id [ congestion-control ]
Links the specified APN network ID with the specified APN profile.
apn_net_id
must be an alphanumeric string of 1 through 63 characters, including dots (.) and dashes (-).
congestion-control
: MME or SGSN only. This optional keyword configures the MME or SGSN to
apply congestion control actions for this specific APN. Refer to the
drop
and
reject
commands within the