для Cisco Cisco Packet Data Gateway (PDG)
PCC-Service Configuration Mode Commands
timeout long-duration ▀
Command Line Interface Reference, StarOS Release 17 ▄
7733
timeout long-duration
Configures the long duration timeout and inactivity duration for subscriber session before system notifies or terminates
session in PCC Service instance.
session in PCC Service instance.
Product
IPCF
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > PCC Service Configuration
configure > context context_name > pcc-service service_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-pcc-service)#
Syntax
timeout long-duration ldt_timeout [ action {detection | disconnect }]
[ no | default] timeout long-duration
no
Removes the configured long duration timeout value and action in PCC Service instance.
default
Sets the the long duration timeout value to the default value of ‘0’ which disables the long duration timeout
configuration in PCC Service instance.
configuration in PCC Service instance.
long-duration
ldt_timeout
Default: 0
Designates the maximum duration of the session, in seconds, before the system automatically
reports/terminates the session.
Specifies the maximum amount of time, in seconds, before the specified timeout action is activated.
Designates the maximum duration of the session, in seconds, before the system automatically
reports/terminates the session.
Specifies the maximum amount of time, in seconds, before the specified timeout action is activated.
ldt_timeout
must be a value in the range from 0 through 4294967295.
The special value 0 disables the timeout specified.
action
{
detection
|
disconnect
}
Default: Detection
Specifies the action to be taken on expiry of long duration timeout duration
Specifies the action to be taken on expiry of long duration timeout duration
ldt_timeout
set with
timeout
long-duration
command.
detection
: sets the system to detect the sessions for which long duration timeout timer is exceeded
and sends the SNMP TRAP and CORBA notification. This is the default behavior.
disconnect
: sets the system to send SNMP TRAP and CORBA notification and disconnect the
subscriber session once the long duration timeout timer is expired.