для Cisco Cisco Packet Data Gateway (PDG)
Service Redundancy Protocol Configuration Mode Commands
▀ guard-timer
▄ Command Line Interface Reference, StarOS Release 17
8362
guard-timer
Configures the redundancy-guard-period and monitor-damping-period for SRP service monitoring.
Product
All products supporting ICSR
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > Service Redundancy Protocol Configuration
configure > context context_name > service-redundancy-protocol
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-srp)#
Syntax
guard-timer { aaa-switchover-timers { damping-period seconds | guard-period seconds } |
diameter-switchover-timers { damping-period seconds | guard-period seconds } | srp-
redundancy-timers { aaa { damping-period seconds | guard-period seconds } | bgp {
damping-period seconds | guard-period seconds } | diam { damping-period seconds | guard-
period seconds } }
diameter-switchover-timers { damping-period seconds | guard-period seconds } | srp-
redundancy-timers { aaa { damping-period seconds | guard-period seconds } | bgp {
damping-period seconds | guard-period seconds } | diam { damping-period seconds | guard-
period seconds } }
default guard-timer aaa-switchover-timers { damping-period | guard-period }
default guard-timer diameter-switchover-timers { damping-period | guard-period }
default guard-timer srp-redundancy-timers { aaa { damping-period | guard-period } | bgp {
damping-period | guard-period } | diam { damping-period | guard-period } }
damping-period | guard-period } | diam { damping-period | guard-period } }
default
Sets the specified guard timer to its default value:
damping-period = 60 seconds
guard-period = 60 seconds
aaa-switchover-timers
Sets timers that prevent back-to-back ICSR switchovers due to an AAA failure (post ICSR switchover) while
the network is still converging.
the network is still converging.
diameter-switchover-timers
Sets timers that prevent a back-to-back ICSR switchover due to a Diameter failure (post ICSR switchover)
while the network is still converging.
while the network is still converging.
srp-redundancy-timers
Sets timers that prevent an ICSR switchover while the system is recovering from a local card-reboot/critical-
task-restart failure.
task-restart failure.