для Cisco Cisco Packet Data Gateway (PDG)
SGSN Service Configuration Mode Commands
▀ sm
▄ Command Line Interface Reference, StarOS Release 17
8564
If the
no
form of this keyword is configured, the APN-AMBR and GBR higher than “16” Mbps are allowed.
By default, the SGSN does not cap APN-AMBR or reject GBR bearer activation with bitrates higher than
“16” Mbps.
“16” Mbps.
Usage
Repeat the command to configure multiple session management parameters for the SGSN service.
Example
Use a command similar to the following to set the expiry for
5
seconds for the session manager’s T3385-
timeout:
sm T3385-timeout 5