для Cisco Cisco Tunnel Terminating Gateway (TTG)
Diameter Host Select Configuration Mode Commands
host-select row-precedence ▀
Command Line Interface Reference, StarOS Release 17 ▄
3555
no host-select row-precedence precedence table { 1 | 2 | range-table { 1 | 2 } } [ -
noconfirm ]
noconfirm ]
no
Removes the specified row from the primary or secondary table or primary/secondary MSISDN prefix table
for 14.0 and earlier releases, or IMSI/MSISDN range table for 15.0 and later releases.
for 14.0 and earlier releases, or IMSI/MSISDN range table for 15.0 and later releases.
row-precedence
precedence
Specifies the row in the table as an integer from 1 through 128. Note that the row precedence number in
IMSI/MSISDN configuration must be unique.
IMSI/MSISDN configuration must be unique.
Important:
In StarOS release 14.0 and later,
precedence
may be an integer from 1 through 256 for SCM.
table { 1 | 2 }
Specifies the Diameter host table that will be edited.
1: Specifies the primary table
2: Specifies the secondary table
table prefix-table { 1 | 2 } msisdn-prefix-from msisdn_prefix_from msisdn-prefix-
to msisdn_prefix_to host host_name [ realm realm_id ] [ secondary host
sec_host_name realm sec_realm_id ]
to msisdn_prefix_to host host_name [ realm realm_id ] [ secondary host
sec_host_name realm sec_realm_id ]
Important:
This command syntax is applicable to StarOS release 14.1 and earlier.
prefix-table { 1 | 2 }
: Specifies a primary or secondary table containing ranges of MSISDN prefixes.
msisdn-prefix-from msisdn_prefix_from msisdn-prefix-to msisdn_prefix_to
: Specifies the
starting and ending Mobile Station International Subscriber Directory Number (MSISDN) prefixes for a row
in the prefix-table.
in the prefix-table.
host host_name
: Identifies the primary Diameter peer server to be added to this row by its host name.
host_name
can be entered as an IP address or a DNS hostname (1 through 128 alphanumeric characters).
secondary host host_name
: Identifies the secondary Diameter peer server to be added to this row by its
host name.
host_name
can be entered as an IP address or a DNS hostname (1 through 128 alphanumeric
characters).
realm realm_id
: Specifies an optional realm ID as an alphanumeric string of 1 through 128 characters.
table { { range-table { 1 | 2 } { imsi-based { [ prefix | suffix ] imsi-value [
to imsi-value ] } | msisdn-based { [ prefix | suffix ] msisdn-value [ to msisdn-
value ] } } host host_name [ realm realm_id ] [ secondary host sec_host_name
realm sec_realm_id ] algorithm { active-standby | round-robin } ] } }
to imsi-value ] } | msisdn-based { [ prefix | suffix ] msisdn-value [ to msisdn-
value ] } } host host_name [ realm realm_id ] [ secondary host sec_host_name
realm sec_realm_id ] algorithm { active-standby | round-robin } ] } }
Important:
This command syntax is applicable to StarOS release 15.0 and later.
range-table { 1 | 2 }
: Specifies a primary or secondary table containing ranges of IMSI or MSISDN
prefix/suffix.
imsi-based { [ prefix | suffix ] imsi-value [ to imsi-value
: Specifies to use the
prefix/suffix/range values of IMSI of the subscriber for Diameter peer selection.