для Cisco Cisco Packet Data Gateway (PDG)
Exec Mode show Commands (H-L)
show ip static-route ▀
Command Line Interface Reference, StarOS Release 16 ▄
4565
show ip static-route
Displays information related to currently configured static routes.
Product
All
Privilege
Security Administrator, Administrator, Operator, Inspector
Mode
Exec
The following prompt is displayed in the Exec mode:
[local]host_name#
Syntax
show ip static route [ ip_address/mask ] | { grep grep_options | more ]
ip_address/mask
Specifies an IP address/mask (CIDR) for a static route in IPv4 dotted-decimal or IPv6 colon-separated-
hexadecimal notation.
hexadecimal notation.
| { grep
grep_options
|
more }
Pipes (sends) the output of this command to the specified command. You must specify a command to which
the output of this command will be sent.
For details on the usage of
the output of this command will be sent.
For details on the usage of
grep
and
more
, refer to the Regulating a Command’s Output section of the
Command Line Interface Overview chapter.
Usage
Use this command to display information about IP static routes.
Example
To display detailed information about route
192.155.33.2/24
, enter the following command:
show ip static route 192.155.33.2/24
Important:
Output descriptions for commands are available in the Statistics and Counters Reference.