для Cisco Cisco Packet Data Gateway (PDG)
PCC-Service Configuration Mode Commands
condition-group ▀
Command Line Interface Reference, StarOS Release 16 ▄
7581
The commands configured in this mode are defined in the PCC-Condition-Group Configuration Mode
Commands chapter of Command Line Interface Reference.
Commands chapter of Command Line Interface Reference.
Caution:
This is a critical configuration. The PCC-Condition Group can not be configured
without this configuration. Any change to this configuration would lead to removing or disabling
configuration parameters defined here.
configuration parameters defined here.
Example
Following command creates a PCC-condition-group named
cond_grp1
with in a PCC-service instance.
condition-group cond_grp1
Following command removes a pre-configured PCC-condition-group named
cond_grp1
from a PCC-service
instance.
no condition-group cond_grp1