для Cisco Cisco Packet Data Gateway (PDG)
Subscriber Configuration Mode Commands
tunnel ipsec ▀
Command Line Interface Reference, StarOS Release 16 ▄
8639
tunnel ipsec
Configures sessions for the current subscriber to use an IPSec tunnel based on the IP pool corresponding to the
subscriber’s assigned IP address.
subscriber’s assigned IP address.
Product
PDSN
GGSN
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > Subscriber Configuration
configure > context context_name > subscriber { default | name subscriber_name }
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-subscriber)#
Syntax
tunnel ipsec use-policy-matching-ip-pooler-address
no tunnel ipsec use-policy-matching-ip-pooler-address
no
Disables the use of the IPSec policy that matches the IP pool that the assigned IP address relates to.
Usage
Use this command to set the current subscribers sessions to use an IPSec policy that is assigned to the IP pool
that the subscribers assigned IP address relates to.
that the subscribers assigned IP address relates to.
Example
The following command enables the use of the policy that matches the IP pool address:
tunnel ipsec use-policy-matching-ip-pooler-address