для Cisco Cisco Tunnel Terminating Gateway (TTG)
APN Configuration Mode Commands
▀ nai-construction
▄ Command Line Interface Reference, StarOS Release 16
1378
password
Configures the authentication user-password for this NAI-constructed user.
password
is an alphanumeric
string of 0 through 63 characters.
use-shared-secret-password
Specifies use of the RADIUS authentication shared secret password for this NAI-constructed user.
Usage
NAI-construction defines the behavior for construction at the APN level. If defined for a particular APN, this
command works independently and overwrites the behavior of aaa constructed-nai defined at the context
level for calls involving this APN.
Note that NAI construction using IMSI or MSISDN, where either no user name is received or a blank user
name is received for authentication, is applicable only when NAI constructed authentication is enabled using
the
command works independently and overwrites the behavior of aaa constructed-nai defined at the context
level for calls involving this APN.
Note that NAI construction using IMSI or MSISDN, where either no user name is received or a blank user
name is received for authentication, is applicable only when NAI constructed authentication is enabled using
the
aaa nai-construction authentication
command in Context Configuration Mode.
Example
The following command enables NAI-construction using IMSI as the authentication type with an encrypted
password:
password:
nai-construction imsi encrypted password s1289sf980333jwwdo97342