для Cisco Cisco Tunnel Terminating Gateway (TTG)
HNB-CS Network Configuration Mode Commands
▀ null-nri
▄ Command Line Interface Reference, StarOS Release 16
6236
null-nri
Configures the null NRI for load redistribution in support of Iu-Flex functionality. The NRI value defined with this
command must be unique across the pool areas. This null-NRI is used by HNB-GW for load redistribution during MSC
offloading.
command must be unique across the pool areas. This null-NRI is used by HNB-GW for load redistribution during MSC
offloading.
Product
HNB-GW
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > HNB-CS Network Configuration
configure > cs-network cs_instance
Entering the above command sequence results in the following prompt:
[local]host_name(config-cs-network-instance_id)#
Syntax
null-nri null_nri_value
no null-nri null_nri_value
no
Disables/removes the configured null-NRI value used for MSC offloading procedure.
null_nri_value
Specifies the null-NRI value to be used by HNB-GW for load re-distribution during MSC offloading as an
integer from 0 through 1023.
Without MOCN configuration this value can be entered only once.
For MOCN a unique null-NRI must be assigned to each MOCN operator identified by its PLMN-ID
(MCC+MNC).
A 0 (zero) value configured as a null-NRI indicates the keyword is not to be used. There is no default value
for this parameter.
integer from 0 through 1023.
Without MOCN configuration this value can be entered only once.
For MOCN a unique null-NRI must be assigned to each MOCN operator identified by its PLMN-ID
(MCC+MNC).
A 0 (zero) value configured as a null-NRI indicates the keyword is not to be used. There is no default value
for this parameter.
Usage
Use this command to identify the MSC to be used by HNB-GW for load redistribution during MSC
offloading over an Iu-Flex interface.
There is one unique null-NRI in a PLMN supporting pool functionality.
Without MOCN configuration this command can be entered only once. For MOCN a unique null-NRI must
be assigned to each MOCN operator identified by its PLMN-ID (MCC+MNC).
offloading over an Iu-Flex interface.
There is one unique null-NRI in a PLMN supporting pool functionality.
Without MOCN configuration this command can be entered only once. For MOCN a unique null-NRI must
be assigned to each MOCN operator identified by its PLMN-ID (MCC+MNC).
Example
The following command sets the null-NRI as
1001
to be used by HNB-GW for load redistribution during
MSC offloading:
null-nri 1001