для Cisco Cisco Packet Data Gateway (PDG)

Скачать
Страница из 80
DSCP Marking on S1-U Relay
Cisco supports the DSCP marking of S1-U traffic traversing the HeNB-GW. This functionality on HeNB-GW
is supported through command line interface (CLI). CLI configuration capability has been enabled for DSCP
marking for both Access and Network service.
CLIs are used for the dscp marking configuration for IP packets sent out on the S1-U interface, from the
HeNB-GW to the Access/Network side. Default value used for dscp marking is the dscp value for the incoming
packet.
For more information on the supported CLIs for this feature, refer the CLI Reference Guide.
Important
Fault Reporting Support
SNMP traps are used for faults and fault reporting in the system for network side S1-MME and S1-U interfaces.
For these traps on the network side, some other mechanism is required, as the SCTP/S1-MME associations
do not generate SNMP traps.
Location Reporting Support
Cisco HeNB-GW supports the location reporting feature for the subscribers/UE movements.
Location Reporting is the procedure by which the serving MME keeps in the track of the UE change in location
within the allowed tracking area list of the eNodeB.
With the HeNBGW deployed in the Femtocell LTE network, MME does not directly connect to HeNBs, and
therefore any location report message is forwarded by the HeNB-GW to and fro. When HeNB-GW receives
location reporting control messages, it forwards the same to the appropriate HeNB for location reporting
procedure.
QoS Support
Cisco HeNB-GW along with the SeGW supports QoS handling based on the DSCP mapping configuration.
QoS support provides a foundation for contributing towards improved Quality of User Experience (QoE) by
enabling deterministic end-to-end forwarding and scheduling treatments for different services or classes of
applications pursuant to their requirements for committed bandwidth resources, jitter and delay. In this way,
each application receives the service treatment that users expect.
Redundancy Support
To support redundancy, the HeNB-GW tasks should be started based on the following guidelines:
• HENBGW DEMUX - The HENBGW DEMUX task recovers and updates the relevant information
regarding HeNB/UE connections by querying all the session managers (SMGRs) in the system. This
HeNB-GW Administration Guide, StarOS Release 19    
17
HeNB Gateway in Wireless LTE Network
DSCP Marking on S1-U Relay