для Cisco Cisco Packet Data Gateway (PDG)

Скачать
Страница из 518
This feature is released with a feature license that will not be enforced until Release 20.0.
Important
Command Changes
paging-priority cs
The following new CLI command under the Call Control profile configuration mode is configured to support
sending of paging-priority value in S1AP paging-request message to the eNodeB. This command helps the
operator to prioritize the Mobile terminated CSFB voice calls of a set of subscribers irrespective of them
subscribed for eMLPP services or not.
configure
call-control-profile cc_profile_name
[remove] paging-priority cs value
exit
Notes:
• By default, sending of paging priority-ie in S1AP paging-request message to eNodeBs is enabled. The
priority value received from the MSC/VLR is relayed to the eNodeB.
• The keyword cs is used to configure the value of paging-priority sent to eNodeB for CS paging. The
paging priority value is an integer in the range "0" up to "7". Configuring a value of "0" disables sending
of paging priority value to eNodeB.
• A lower value of paging priority indicates a higher priority.
• Older values of paging priority are overridden by configuring new values.
• The remove keyword deletes the existing configuration.
mps cs-priority
The following new CLI command under the Call Control profile configuration mode is configured to support
multimedia priority service in the CS domain. This command helps the operator to prioritize the Mobile
originating voice calls of a set of subscribers irrespective of them subscribed for eMLPP services or not.
config
call-control-profile cc_profile_name
[remove] mps cs-priority { subscribed | none }
exit
Notes:
• By default MME sets the value of "CS fallback indicator IE" as "CSFB High Priority" in the S1AP UE
Context Setup/Modification if the MPS-CS-Priority value is set in "MPS-Priority" in EPS Subscription
from HSS
• The keyword cs-priority configures support for priority service in the CS domain.
• The keyword subscribed configures support for priority service in the CS domain. The "CS Fallback
Indicator IE" is set to "CSFB High Priority" in the S1AP UE Context Setup/Modification message.
Release Change Reference, StarOS Release 19    
199
MME Changes in Release 19
Paging Priority IE