для Cisco Cisco Packet Data Gateway (PDG)
Performance Indicator Changes
show configuration errors
If the configured min-link value is greater than the number of links in the LAG, an error is displayed in the
output of this command. This error allows the operator to take corrective action by adding extra links to the
LAG or reducing the min-link value.
output of this command. This error allows the operator to take corrective action by adding extra links to the
LAG or reducing the min-link value.
show configuration link-aggregation group
The following new statistic is added to the output of this command:
• min-link number_links
show configuration port
The following new statistic is added to the output of this command when the LAG master port number is
specified:
specified:
• min-link number_links
show link-aggregation info group
The following new statistic is added to the output of this command:
• min-link
show link-aggregation table
The following new statistic is added to the output of this command:
• LA# (link down due to min-link failure)
show port info
The following new statistic is added to the output of this command when the LAG master port number is
specified:
specified:
• (min_link)
show port table
The following new statistic is added to the output of this command:
• LA# (link down due to min-link failure)
Release Change Reference, StarOS Release 19
461
System Changes in Release 19
LAG is Usable When a Minimum Number of Links are Available