для Cisco Cisco Packet Data Gateway (PDG)
System Changes in Release 17
System and Platform Enhancements for Release 17.0 ▀
Release Change Reference, StarOS Release 17 ▄
635
ipv6 route ipv6_address/prefix_length { interface name | next-hop ipv6_address
interface name } [ cost cost] [ fall-over bfd multihop mhsess_name ] [ precedence
precedence ] [ vrf vrf_name [ cost value ] [ fall-over bfd multihop mhsess_name ] [
precedence precedence ]
interface name } [ cost cost] [ fall-over bfd multihop mhsess_name ] [ precedence
precedence ] [ vrf vrf_name [ cost value ] [ fall-over bfd multihop mhsess_name ] [
precedence precedence ]
end
The ipv6 route command now also allows you to add a static multihop BFD route.
ipv6 route static multihop bfd mhbfd_sess_name local_endpt_ipv6addr
remote_endpt_ipv6addr
remote_endpt_ipv6addr
Notes:
mhbfd_sess_name specifies the multihop BFD session name as an alphanumeric string of 1 through 79
characters.
local_endpt_ipv6addr specifies the local endpoint address in IPv6 colon-separated-hexadecimal notation.
remote_endpt_ipv6addr specifies the remote endpoint address in IPv6 colon-separated-hexadecimal notation.
Important:
SNMP traps are generated when BFD sessions go up and down (BFDSessUp and BFDSessDown).
bfd interval
The range of accepted values for two keywords have been extended for this Ethernet Interface Configuration mode
command.
command.
configure
context context_name
interface interface_name broadcast
bfd interval interval_num min_rx milliseconds multiplier value
end
Notes:
For release 17.0 onwards,
interval_num
is an integer from 50 through 10000. (Default 50)
For release 17.0 onwards,
milliseconds
is an integer from 50 through 10000. (Default 50)
CSCum87774 - MFL 1858: KPI to Increase the 32K BGP routes per context to
64K (MPN)
Applicable Products: All
Related CDETS ID: CSCup90954