для Cisco Cisco Packet Data Gateway (PDG)
MME Changes in Release 16
MME Enhancements for 16.0 ▀
Release Change Reference, StarOS Release 16 ▄
279
Command Changes
DNS based MSC selection can be defined for an MME service, or for a Call Control Profile. Both configuration options
specify the context in which a DNS client configuration has been defined.
specify the context in which a DNS client configuration has been defined.
dns
The
msc
keyword has been added to configure DNS selection of an MSC for a specific MME service:
configure
context ctxt_name
mme-service service_name
dns msc context ctxt_name
[ no ] dns msc
exit
Notes:
Refer to the Single Radio Voice Call Continuity chapter in the MME Administration Guide for more information.
dns-msc
The
dns-msc
command has been added to configure DNS selection of an MSC based on a Call Control Profile.
Configuration via Call Control Profile takes precedence in cases where DNS selection is also configured in the MME
service (see above).
service (see above).
configure
call-control-profile profile_name
dns-msc context ctxt_name
[ remove ] dns-msc
exit
Notes:
Refer to the Single Radio Voice Call Continuity chapter in the MME Administration Guide for more information.
Performance Indicator Changes
show mme-service name <svc_name>
This command displays the context ID configured for the specified MME service name. This context contains the DNS
client configuration used for DNS-based MSC selection.
client configuration used for DNS-based MSC selection.
DNS MSC Context : ingress
The same command also displays all MSC servers configured in the specified MME service.