для Cisco Cisco Packet Data Gateway (PDG)
P-GW Changes in Release 16
P-GW Enhancements for 16.1 ▀
Release Change Reference, StarOS Release 16 ▄
339
LTE-to-S4SGSN handover
Attempted
Succeeded
Failed
CSCun12922 - Dedicated bearer timeout Min value to be 5 min
Command Changes
timeout bearer-inactivity
This command configures the bearer inactivity timer and the threshold value of the traffic through an APN. The
minimum configurable value of bearer inactivity timer has been reduced from 900 seconds to 300 seconds.
minimum configurable value of bearer inactivity timer has been reduced from 900 seconds to 300 seconds.
configure
context context_name
apn apn_name
timeout bearer-inactivity [ gbr | non-gbr ] dur_seconds volume-threshold {
downlink | total | uplink } bytes
downlink | total | uplink } bytes
timeout bearer-inactivity exclude-default-bearer
no timeout bearer-inactivity [ exclude-default-bearer | gbr | non-gbr ]
end
Notes:
dur_seconds
: Specifies the timeout for the bearer inactivity timer in seconds. Valid entries are from 300 to
2592000 seconds (5 minutes to 720 hours).
CSCun84742 - S6b Assume +ve counter is missing for the Current Subs in
system
Feature Changes
Statistics added for S6b Assume Positive State for Subscribers
AAA diameter authentication can be configured to assume the subscriber as valid for certain AAR error response code
and by-pass S6b from then on. Counters have been introduced on the GGSN, P-GW, SAEGW to display the total
number of subscribers which are in S6b by-passed state (also called “assumed positive”).
and by-pass S6b from then on. Counters have been introduced on the GGSN, P-GW, SAEGW to display the total
number of subscribers which are in S6b by-passed state (also called “assumed positive”).