для Cisco Cisco Packet Data Gateway (PDG)
SecGW Changes in Release 16
SecGW Enhancements for 16.0 ▀
Release Change Reference, StarOS Release 16 ▄
455
Command Changes
dhcp { context-name
context_name
| service-name
srvc_name
}
This is a new command in a wsg-service configuration that allows you to specify a DHCPv4 proxy server for allocating
IP addresses. You must specify both the context associated with the DHCPv4 service, as well as the name of the service.
IP addresses. You must specify both the context associated with the DHCPv4 service, as well as the name of the service.
This will be the DHCPv4 service used if you configure the IP address allocation method to dhcp-proxy.
configure
context wsg_context
ip address alloc-method dhcp-proxy
dhcp context-name dhcpv4_srvc_context
dhcp service-name dhcpv4_service
end
Notes:
Only one DHCPv4 service can be configured.
You must restart the WSG service for these settings to be effective. You restart the service by unbinding and
binding the IP address to the service context.
ip addresss alloc-method { dhcp-proxy | local }
dhcp-proxy is a new keyword in this command. It specifies the use of a DHCPv4 service for allocating IPv4 addresses.
configure
context wsg_context
ip address alloc-method dhcp-proxy
ip address alloc-methos dhcp-proxy
end
Notes:
The DHCPv4 service that will be used must be specified via the dhcp context-name and dhcp service-name
commands.
You must restart the WSG service for this setting to be effective. You restart the service by unbinding and
binding the IP address to the service context.