для Cisco Cisco Packet Data Gateway (PDG)
AAA Changes in Release 16
▀ AAA Enhancements for 16.2
▄ Release Change Reference, StarOS Release 16
46
custom-reauth-trigger { apn-ambr-mod-failure | default-bearer-qos-change |
default-bearer-qos-mod-failure | none | qos-change | resource-modification-request | ue-
ip-addr-allocate | ue-ip-addr-release }
default-bearer-qos-mod-failure | none | qos-change | resource-modification-request | ue-
ip-addr-allocate | ue-ip-addr-release }
default custom-reauth-trigger
end
Notes:
The keywords added to this command enable/disable these implicit event triggers — QoS change, UE IP address
allocation, UE IP address release, Default EPS bearer QoS change, Resource modification request, APN-
AMBR modification failure, Default EPS bearer QoS modification failure respectively. By default, all these
implicit event triggers are enabled.
AMBR modification failure, Default EPS bearer QoS modification failure respectively. By default, all these
implicit event triggers are enabled.
CSCuo08909 - Charging QoS MBR values when QCI not included in QoS-Info
from PCRF
Applicable Products: GGSN, HA, HSGW, IPSG, PDSN, P-GW, S-GW
Feature Changes
Updating Session QoS Information in Session Manager
As part of this enhancement, the gateway nodes take into account the changed QoS values MBR UL and DL for the
non-GBR bearer indicated by Bearer-Id value even if QCI AVP is not present inside QoS-Information AVP.
non-GBR bearer indicated by Bearer-Id value even if QCI AVP is not present inside QoS-Information AVP.