для Cisco Cisco ASR 5000

Скачать
Страница из 640
  Idle Mode Signalling Reduction on the S4-SGSN 
How ISR Works  ▀   
SGSN Administration Guide, StarOS Release 18  ▄  
 
   
 
The ISR is enabled by configuration. 
 
The peer node is an MME. 
 
If the old node is an old S4-SGSN, the MME sends a Context Acknowledge (ISR Activated) message to the old 
SGSN.  
 
Unless ISR Activated is indicated by the MME, the old S4-SGSN marks in its context that the information in the 
Gateways is invalid. This ensures that the old S4-SGSN updates the Gateways if the UE initiates a RAU 
procedure back to the old S4-SGSN before completing the ongoing TAU procedure. If ISR Activated is 
indicated to the old S4-SGSN, this indicates that the old S4-SGSN shall maintain its UE context including 
authentication quintets and stop the inter-SGSN handover procedure guard timer (2G).When the UE is initially 
attached, the SGSN started the Mobile Reachability Timer (MNR timer). This timer value is slightly larger 
than the Periodic RAU Timer value given to the UE by SGSN. The default is 4 minutes longer. The UE is 
expected to contact SGSN through a periodic RAU or some other signalling message within this timer. If the 
UE did not contact SGSN within this timer, the S4-SGSN shall start the implicit detach timer with a slightly 
larger value than the UE's GERAN/UTRAN Deactivate ISR timer (T3323). The implicit detach timer value is 
also configurable at the SGSN. If the UE fails to contact even within this implicit detach timer, then the SGSN 
will locally detach the UE and will send a Detach Notification with cause Local detach to the MME so that ISR 
is deactivated at the MME. 
 
When ISR Activated is not indicated and an inter-SGSN handover procedure guard timer expires, the old SGSN 
deletes all bearer resources of that UE. As the Context Acknowledge from the MME does not include any S-
GW change, the S4 SGSN does not send any Delete Session Request message to the S-GW.