для Cisco Cisco Packet Data Gateway (PDG)

 

▄  Statistics and Counters Reference, StarOS Release 18  

The full command is as follows: 

show session trace subscriber network-element <type> trace-ref <id> 

 

 

Trace reference 

The trace reference ID for the trace displayed. The ID is the MCC (3 digits), followed by the MNC (3 
digits), then the trace ID number (3 byte octet string). 

Activation time 

The date and time when the trace was initiated. 

IMEI or IMSI 

The subscriber identification. 



 

IMEI: The International Mobile Equipment Identification number of the subscriber’s UE. 



 

IMSI: The International Mobile Subscriber Identification (IMSI) which is the 3-digit MCC 
(Mobile Country Code), 2 or 3-digit MNC (Mobile Network Code), and the MSIN (Mobile 
Subscriber Identification Number). 

Actively Tracing 

Specifies if the trace is currently active. 

Trace Recording Session 
Reference 

The current active trace recording session reference number. 

Recording start time 

The date and time when the session trace recording started. 

Total number of trace 
recording sessions 
triggered 

The total number of trace recording sessions initiated. 

Total number of 
messages traced 

The total number of messages traced for this trace reference. 

Number of messages dropped 

No memory 

The total number of messages dropped due to a no memory condition. 

No trace recording 
session 

The total number of messages dropped due to a failure to receive the start trigger. 

Interface not traced 

The total number of messages dropped due to the messages being received on interfaces not part of 
the trace interface list. 

Total number of files 
created 

The total number of trace recording files created. 

Number of files deleted 

No space 

The total number of files deleted due to a lack of space on the storage device. 

Traced Interfaces 

List of interfaces configured for the session trace. 

Trace Triggers 

Identifies the triggers used by this subscriber.