для Cisco Cisco Packet Data Gateway (PDG)
show srp
▀ show srp info
▄ Statistics and Counters Reference, StarOS Release 18
4640
show srp info
Table 583.
show srp info
Command Output Descriptions
Field
Description
Service Redundancy Protocol
Context
Displays the srp context configured for service redundancy protocol. Only one context may be
configured with this service.
configured with this service.
Local Address
Displays the local address of the chassis.
Chassis State
Displays the chassis state (init, standby or active).
Chassis Mode
Displays the chassis mode (primary or backup).
Chassis Priority
Displays the chassis priority. The chassis priority is an integer that determines which chassis is in the
active state. The lower number has a higher priority. The priority must be an integer from 1 through 255.
Default is 125.
active state. The lower number has a higher priority. The priority must be an integer from 1 through 255.
Default is 125.
Local Tiebreaker
Displays the MAC address which is used to determine priority when both chassis have the same priority
and route modifier. The lower MAC address has the higher priority.
and route modifier. The lower MAC address has the higher priority.
Route-Modifier
Displays the modifier which is used to determine which chassis has priority. The lower the number the
higher the priority.
higher the priority.
DSCP Markings
Displays current settings for DSCP marking of SRP messages.
Control
Displays DSCP value set for SRP control messages.
Session
Displays DSCP value set for SRP checkpoint messages (session maintenance).
Peer Remote Address
Displays the IP address of the remote peer.
Peer State
Displays whether the peer is in the active or standby state.
Peer Mode
Displays the peer mode (standby or active).
Peer Priority
Displays the peer priority (primary or backup).
Peer Tiebreaker
Displays the peer MAC address.
Peer Route-Modifier
Displays the peer’s BGP route modifier.
Last Hello Message
received
received
Displays a time stamp for the most recent hello message that was received.
Peer Configuration
Validation
Validation
Displays the peer configuration validation.
Last Peer
Configuration Error
Configuration Error
Displays the most recent error that was received when the chassis was not able to validate its peer
configuration.
configuration.
Last Peer
Configuration Event
Configuration Event
Displays a time stamp for the last peer configuration event.