для Cisco Cisco Packet Data Gateway (PDG)

 

 

 

Username 

Specifies the name of the subscriber. 

Status 

Indicates the status of the subscriber’s session. The status can be Online or Offline and Active or 
Dormant. 

Access Type 

Indicates the session type for this subscriber. See 

  

Network Type 

 Indicates the network service used for the subscriber session. See 

  

callid 

Displays the subscriber’s call identification number (callid). 

msid 

Displays the subscriber’s mobile station identification (MSID). 

input pkts 

Indicates the number of packets received. 

output pkts 

Indicates the number of packets transmitted. 

input bytes 

Indicates the number of bytes received. 

output bytes 

Indicates the number of bytes transmitted. 

input bytes dropped 

Indicates the number of bytes that were dropped while receiving data for this subscriber session. 

output bytes dropped 

Indicates the number of bytes that were dropped while transmitting data for this subscriber session. 

input pkts dropped 

Indicates the number of packets that were dropped while receiving data for this subscriber session. 

output pkts dropped 

Indicates the number of packets that were dropped while transmitting data for this subscriber session. 
This field includes packets blocked by Access Control Lists (ACLs). Do not use this figure when 
computing the total number of output packets. 

input pkts dropped due 
to zero mbr 

Indicates the number of packets that were dropped while receiving data due to configured maximum bit 
rate (MBR) was set to zero for a subscriber. 
This counter is applicable when system drops uplink/downlink packets when SGSN notifies Update 
PDP Contexts for QOS change with bandwidth rate as zero for conversation/streaming class of 
services. 

output pkts dropped due 
to zero mbr 

Indicates the number of packets that were dropped while transmitting data due to configured maximum 
bit rate (MBR) was set to zero for a subscriber. 
This counter is applicable when system drops uplink/downlink packets when SGSN notifies Update 
PDP Contexts for QOS change with bandwidth rate as zero for conversation/streaming class of 
services. 

pk rate from user(bps) 

The peak data rate, in bits per second, obtained for data sent from the subscriber to the network during 
the last sampling period. The sampling period is 30 seconds. 

pk rate to user(bps) 

The peak data rate, in bits per second, obtained for data received from the network by the subscriber 
during the last sampling period. The sampling period is 30 seconds. 

ave rate from user(bps) 

The average data rate, in bits per second, obtained for data sent from the subscriber to the network 
during the last sampling period. The sampling period is 30 seconds.