Листовка для Cisco Cisco Packet Data Gateway (PDG)
Call Control Profile Configuration Mode
sgsn-core-nw-interface ▀
Cisco ASR 5x00 Command Line Interface Reference ▄
1951
sgsn-core-nw-interface
This command enables operators to select the Gn interface or the S4 interface for EPC capable UEs on the S4-SGSN.
Product
SGSN
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Call Control Profile Configuration
configure > call-control-profile profile_name
Entering the above command sequence results in the following prompt:
[local]host_name(config-call-control-profile-profile_name)#
Syntax
sgsn-core-nw-interface { gn | s4 }
sgsn-core-nw-interface { gn | s4 }
Specifies the interface that EPC-capable UEs will use to communicate wit the packet core gateways
(GGSN/SGW). Selection must be one of:
(GGSN/SGW). Selection must be one of:
gn
: Forces the SGSN to forcefully select the Gn interface for EPC-capable UEs.
s4
: Specifies that the SGSN will use the S4 interface between the S4-SGSN and packet core gateways
(GGSN/SGW). This is the default setting for EPC-capable UEs.
Usage
Use this command to forcefully select the interface that the SGSN will use for EPC-capable UEs.
This command is available only if the SGSN S4 Interface license is enabled on the SGSN.
This command is available only if the SGSN S4 Interface license is enabled on the SGSN.
Example
sgsn-core-nw-interface gn