Листовка для Cisco Cisco Packet Data Gateway (PDG)
PDSN Service Configuration Mode Commands
registration-deny ▀
Cisco ASR 5x00 Command Line Interface Reference ▄
7563
max-deny-reply-limit
num
Default: 3
Configures max number of retries of erroneous registration request message from PCF for a session before
PDSN terminates the session.
Configures max number of retries of erroneous registration request message from PCF for a session before
PDSN terminates the session.
num
can be from 1 to 10.
mismatched-coa-source-address
Default: disabled
Denies RP requests which have a care-of-address field that is different from the request source address.
Denies RP requests which have a care-of-address field that is different from the request source address.
new-call
{
connection-setup-record-absent
[
use-deny-code
{
poorly-formed-
request
|
reason-unspecified
} |
reverse-tunnel-unavailable
}
connection-setup-record-absent
: Configures the PDSN to reject calls that do not have the airlink
connection setup record in the RRQ.
use-deny-code
{
poorly-formed-request
|
reason-unspecified
} When rejecting calls that do not
have the airlink setup record, use the specified deny code.
reverse-tunnel-unavailable
: Configures the PDSN to reject calls if the GRE key for a user collides
with that of another user.
session-already-active
PDSN denies Registration requests for sessions that are already active with the error code “poorly formed
request” .
request” .
session-already-closed
PDSN denies RP renew and dereg requests with error code 0x8E for absent R-P sessions.
session-already-dormant
PDSN denies Registration requests for sessions that are already dormant with the error code “poorly formed
request” .
request” .
terminate-session-on-error
Default: Disabled.
Configures PDSN to terminate session if erroneous registration request message is received for the session.
Configures PDSN to terminate session if erroneous registration request message is received for the session.
use-zero-gre-key
Configures the PDSN to set the GRE key to zero (0) when denying a new R-P session.
Usage
Use this command to configure parameters relating to the rejection of registration requests.
Example
To reject calls that do not have the airlink setup record in the RRQ, enter the following command:
registration-deny new-call connection-setup-record-absent
To reject calls if the GRE key collides with that of another user, enter the following command:
registration-deny new-call reverse-tunnel-unavailable