Листовка для Cisco Cisco Packet Data Gateway (PDG)
Service Redundancy Protocol Configuration Mode Commands
▀ audit
▄ Cisco ASR 5x00 Command Line Interface Reference
7950
audit
Sets the start time and periodicity for ICSR Service Redundancy Protocol (SRP) audits.
Product
All products supporting ICSR
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > Service Redundancy Protocol Configuration
configure > context context_name > service-redundancy-protocol
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-srp)#
Syntax
[no] audit daily-start-time hour minute
[no] audit periodicity minutes
default audit periodicity
default
Resets the specified parameter to its default setting of 60.
no
Disables the specified function.
daily-start-time
hour
minute
Specifies the daily start time.
hour
is a two-digit integer from 00 through 23.
minute
is a two-digit interval
from 00 through 59. For example, a start time of 06 00 indicates that the audit will begin at 6:00 AM.
periodicity
minutes
Specifies the interval in minutes for generating SRP audit statistics as an integer from 60 through 43200. For
example, a periodicity of 90 indicates that SRP audit statistics will be generated every 90 minutes beginning
at the specified start time. Default = 60.
example, a periodicity of 90 indicates that SRP audit statistics will be generated every 90 minutes beginning
at the specified start time. Default = 60.
Usage
Use this command and its keywords to specify the start time and periodicity for generating ICSR SRP audit statistics.
This audit ensures that two ICSR peers are in synch and identifies any discrepancies prior to scheduled or unscheduled
switchover events.
switchover events.
Example
The following command sequence specifies a start time of midnight and a periodicity of every two hours for
generating SRP statistics:
generating SRP statistics:
audit daily-start-time 06 00