Листовка для Cisco Cisco Packet Data Gateway (PDG)
PCC-Service Configuration Mode Commands
▀ emergency-apn-map-profile
▄ Cisco ASR 5x00 Command Line Interface Reference
7390
emergency-apn-map-profile
This command creates an emergency APN profile with a given condition group name. The condition group will define a
group of APNs which correspond to the Operator's chosen emergency-APN, and a corresponding policy profile, which
defines operator's QoS configuration for the emergency APN. This command can also be used to delete an existing
emergency APN profile.
group of APNs which correspond to the Operator's chosen emergency-APN, and a corresponding policy profile, which
defines operator's QoS configuration for the emergency APN. This command can also be used to delete an existing
emergency APN profile.
Product
IPCF
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > PCC Service Configuration
configure > context context_name > pcc-service service_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-pcc-service)#
Syntax
[ no ] emergency-apn-map-profile condition-group cond_grp_name profile-policy name
pcc_prof_name
pcc_prof_name
no
Removes/disables the set emergency APN profile from this configuration mode.
condition-group
cond_grp_name
This keywords associates a pre-configured/defined PCC-Condition-Group configured in PCC-Service
Configuration mode to map with specific emergency APN profile.
The
Configuration mode to map with specific emergency APN profile.
The
cond_grp_name
is pre-configured PCC-Condition-Group and must be an alphanumerical string from 1
through 63 characters.
Important:
For more information on PCC-Condition-Group configuration, refer
condition-group
command
in this chapter.
profile-policy
pcc_prof_name
This keywords associates a pre-configured/defined PCC-Service-Profile configured in PCC-Service
Configuration mode to map with specific emergency APN profile mapping configuration.
The
Configuration mode to map with specific emergency APN profile mapping configuration.
The
pcc_prof_name
is pre-configured PCC-Service-Profile and must be an alphanumerical string from 1
through 63 characters.
Important:
For more information on PCC-Service-Profile configuration, refer
profile-policy
command in
this chapter.