Листовка для Cisco Cisco Packet Data Gateway (PDG)
PVC Interface Configuration Mode Commands
ip ospf retransmit-interval ▀
Cisco ASR 5x00 Command Line Interface Reference ▄
7711
ip ospf retransmit-interval
This command configures the retransmit-interval and the delay time in seconds, for OSPF communications.
Product
SGSN
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > PVC Interface Configuration
configure > context context_name > interface interface_name point-to-point
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-if-pvc)#
Syntax
ip ospf dead-interval value
no ip ospf dead-interval
no
Deletes the value set and returns the value to its default.
value
The interval, in seconds, between LSA (Link State Advertisement) retransmissions.
value
must be an integer from 1 through 65535. Default: 5
Usage
Use this command to set the retransmit-intervals or delays for OSPF communications.
Example
To set the dead-interval to 25, use the following command;
ip ospf retransmit-interval 25