Листовка для Cisco Cisco Tunnel Terminating Gateway (TTG)
Global Configuration Mode Commands (L-S)
▀ local-user username
▄ Cisco ASR 5x00 Command Line Interface Reference
5158
security-admin
: Security Administrator users have read-write privileges and can execute any
command throughout the CLI. Security Administrators can execute all system commands, including
those available to the administrator, operator, and inspector users. This level corresponds to both the
System Security Administrator and Application Security Administrator levels in T1.276-2003.
those available to the administrator, operator, and inspector users. This level corresponds to both the
System Security Administrator and Application Security Administrator levels in T1.276-2003.
[ ecs | noecs ]
Specifies whether or not the user has access to Active Charging Service configuration parameters.
ecs
: The user has access.
noecs
: The user does not have access.
Default:
ecs
[ ftp | noftp ]
Default: ftp
Specifies whether or not the user is allowed to access the system via the File Transfer Protocol (FTP) and/or
the Secure File Transfer Protocol (SFTP).
Specifies whether or not the user is allowed to access the system via the File Transfer Protocol (FTP) and/or
the Secure File Transfer Protocol (SFTP).
ftp
: The user has access.
noftp
: The user does not have access.
[ no-lockout-login-failure ]
Default: Disabled
Specifies that this user will never be locked out due to login attempt failures.
Specifies that this user will never be locked out due to login attempt failures.
[ no-lockout-password-aging ]
Default: Disabled
Specifies that this user will never be locked out due to the age of their password.
Specifies that this user will never be locked out due to the age of their password.
[ password password
| nopassword ]
Specifies the initial password for this user.
password
must an alphanumeric string of 6 through 32 characters
that is case sensitive.
Important:
The user is requested to change their password upon their first login.
[ timeout-min-absolute time ]
Default: 0
Specifics the maximum session time (in minutes) for this user.
Specifics the maximum session time (in minutes) for this user.
time
is an integer from 0 through 525600. A
value of “0” indicates no limit.
Important:
This limit applies only to the user’s CLI sessions.
[ timeout-min-idle time ]
Default: 0
Specifics the maximum idle time (in minutes) for this user.
Specifics the maximum idle time (in minutes) for this user.
time
is an integer from 0 through 525600. A
value of “0” indicates no limit.