Листовка для Cisco Cisco Tunnel Terminating Gateway (TTG)
ACS Ruledef Configuration Mode Commands
bearer 3gpp2 bsid ▀
Cisco ASR 5x00 Command Line Interface Reference ▄
767
If the
use-group-of-objects
keyword is included in the command,
string
must be the name of the
group-of-objects to use. In this case, it is checked if the rule is satisfied for either one or none of the objects in
the group-of-objects depending upon the operator used. For example, if the
the group-of-objects depending upon the operator used. For example, if the
operator
is
contains
, the
expression would be true if any of the objects in the specified object group is contained in the BSID. If the
operator
is
!contains
, then the expression would be true if none of the objects in the object group is
contained in the BSID.
string
must be an alphanumeric string of 1 through 16 characters, and may contain punctuation characters.
Usage
Use this command to define rule expressions to match a 3GPP2 Base Station Identifier (BSID).
Example
The following command defines a rule expression to analyze user traffic for 3GPP2 BSID named
bs001_xyz
:
bearer 3gpp2 bsid = bs001_xyz