для Cisco Cisco Packet Data Gateway (PDG)
show mme
▀
Statistics and Counters Reference, StarOS Release 16 ▄
4491
Field
Description
Path State
The state of the path (Up/Down) based on Heartbeat exchanged over the path.
Flow Id
The flow Id assigned by NPU manager to the path over which the packet will reach the MME
manager. This flow ID will be in the range of Flow space created for specific application.
manager. This flow ID will be in the range of Flow space created for specific application.
show mme-service id summary
This command displays the current number of MME-assigned and eNodeB-assigned S1AP session IDs.
Table 429. show mme-service id summary
Field
Description
Total MME S1AP
IDs
IDs
The number of MME-assigned session identifiers between the MME and the eNodeB on the
S1AP interface.
S1AP interface.
Total eNB S1AP
IDs
IDs
The number of eNodeB-assigned session identifiers between the eNodeB and the MME on
the S1AP interface.
the S1AP interface.
show mme-service name <mme_svc_name> offload statistics
This section provides information regarding show commands and/or their outputs in support of load rebalancing (UE
offload).
offload).
Table 430. show mme-service name <mme_svc_name> offload statistics
Field
Description
Current Offload Status
Current offload status of the specified mme-service. Possible values are Not
Started, In Progress and Completed.
Started, In Progress and Completed.
Implicit Detach Status
The Implicit Detach Status specified in the
mme offload
command. When
enabled, if the UE context is not transferred to another MME within 5 minutes then
it will be implicitly detached.
it will be implicitly detached.
Time Duration Requested
The time-duration value specified in the
mme offload
command (in seconds).
This is the maximum allowed time for the offload procedure to complete.