для Cisco Cisco Packet Data Gateway (PDG)
Statistics and Counters Reference, StarOS Release 16 ▄
4567
show network-overload-protection
This chapter describes the output of the
show network-overload-protection
command variants.
show network-overload-protection mme configuration
Table 440.
show network-overload-protection mme configuration
Command Output Descriptions
Field
Description
MME message rate control
S1 paging per eNodeB
Displays the configured S1 paging rate limit applicable to all eNodeBs connected all
MME services. S1 Paging requests to an eNodeB will be rate limited at this threshold
value.
MME services. S1 Paging requests to an eNodeB will be rate limited at this threshold
value.
EGTP path failure
ECM-Idle
ECM-Idle
Displays the configured UE deactivation pacing rate for MME S11/S10/S3 interfaces
(any EGTPC service with interface type "interface-mme") for UEs in ECM Idle state.
(any EGTPC service with interface type "interface-mme") for UEs in ECM Idle state.
EGTP path failure
ECM-Connected
ECM-Connected
Displays the configured UE deactivation pacing rate for MME S11/S10/S3 interfaces
(any EGTPC service with interface type "interface-mme") for UEs in ECM Connected
state.
(any EGTPC service with interface type "interface-mme") for UEs in ECM Connected
state.