для Cisco Cisco Packet Data Gateway (PDG)
Statistics and Counters Reference, StarOS Release 16 ▄
4705
show radius
This chapter describes the output of the
show radius
command.
show radius client status
Table 484.
show radius client status verbose
Command Output Descriptions
Field
Description
RADIUS Client Status
The RADIUS client’s status as “UP” or “DOWN”.
Active nas-ip-address
The NAS IP address configured for the client that is currently active.
NOTE: If the RADIUS Client Status is “DOWN”, then this field displays
“NONE”.
NOTE: If the RADIUS Client Status is “DOWN”, then this field displays
“NONE”.
Configured Primary
nas-ip-address
nas-ip-address
The NAS IP address configured as the primary and the interface’s current status
as “UP” or “Down”.
as “UP” or “Down”.
Configured Backup
nas-ip-address
nas-ip-address
The NAS IP address configured as the backup and the interface’s current status
as “UP” or “Down”.
as “UP” or “Down”.
show radius counters all
Table 485.
show radius counters all
Command Output Descriptions
Field
Description
Per-Context RADIUS Authentication Counters
Access-Request Response
Invalid Source Address Received
The number of Access-Request responses received from
invalid source addresses.
invalid source addresses.
Responses Dropped due to Closed Sockets
The number of responses dropped due to closed sockets.