Release Note для Cisco Cisco Packet Data Gateway (PDG)
SGSN Changes in Release 15.0
SGSN Enhancements for October 31, 2014 ▀
Cisco ASR 5x00 Release Change Reference ▄
467
end
Notes:
apn-type ims
identifies the APN as an IMS APN. This enables the SGSN to delay sending Modify Bearer
Request to the S-GW or Update PDP Context Request to the GGSN until after receiving the Forward
Relocation Complete Ack from the peer during SRNS or handoff procedures. By default this identification is
disabled.
Relocation Complete Ack from the peer during SRNS or handoff procedures. By default this identification is
disabled.
remove
erases this identification configuration from the APN profile and resets to the default.
CSCuo56840 - ’authenticate activate’ not working for 3G calls
Feature Changes
‘authenticate activate’ Deprecated
Previous Behavior: Authentication on activation was disabled/enabled in the configuration via CLI.
New Behavior: The SGSN no longer performs authentication on activation and this functionality has been removed
from the CLI:
from the CLI:
The
authenticate all-events
CLI in the Call-Control Profile configuration mode no longer supports the
SGSN’s authentication on activation.
The
authenticate activate
command in the Call-Control Profile configuration mode, to enable/disable
authentication on activation has been deprecated - see below.
Command Changes
authenticate activate
All forms of the
authenticate activate
command in the Call-Control Profile configuration mode have been
deprecated.
configure
call-control-profile profile_name
authenticate activate [ access-type { gprs | umts } | first | frequency frequency |
primary ] [ access-type { gprs | umts } ]
primary ] [ access-type { gprs | umts } ]
[ no | remove ] authenticate activate [ access-type { gprs | umts } | first | primary
] [ access-type { gprs | umts } ] ]
] [ access-type { gprs | umts } ] ]
end
Performance Indicator Changes
show call-control-profile