Release Note для Cisco Cisco Packet Data Gateway (PDG)
SGSN Changes in Release 15.0
SGSN Enhancements for September 30, 2013 ▀
Cisco ASR 5x00 Release Change Reference ▄
523
config
call-control-profile <profile_name>
network-initiated-pdp-activation secondary access-type <gprs | umts> { all failure-
code <failure_code> | location-area-list instance <instance> failure-code <failure_code>
}
code <failure_code> | location-area-list instance <instance> failure-code <failure_code>
}
end
Notes:
To enable NRSPCA, you must also enable the common flags IE with the
gtpc send
command in the SGTP
Service configuration mode.
remove
added to the command disables NRSPCA by removing the network-initiated-pdp-activation definition
from the configuration.
There is no default form of the command.
network-sharing cs-ps-coordination
The new
homer
and
roamer
filters enable (default) the operator to configure homer/roamer differentiation for 3G
SGSN cs-ps coordination.
config
context <context_name>
iups-service <service_name>
network-sharing cs-ps-coordination [ homer | roamer ]
end
Notes:
default
resets the SGSN default to enable checking for cs-ps-coordination for a 3G SGSN.
no
removes the configuration definition, thus disabling cs-ps-coordination checking for a 3G SGSN.
homer
enables checking for cs-ps-coordination for homers only (UE in its home network) or a 3G SGSN.
roamer
enables checking for cs-ps-coordination for roamers only (UE from outside the home network) for a 3G
SGSN.
session-event-module
From release 15.0 onwards, the session-event module is used by SGSN for event logging. By default, EDR files are
generated at the location: /hd-raid/records/edr. After upgrading to release R15.0, if this CLI is configured, the path for
EDR files changes to: /hd-raid/records/event.
generated at the location: /hd-raid/records/edr. After upgrading to release R15.0, if this CLI is configured, the path for
EDR files changes to: /hd-raid/records/event.
config
context <context_name>
[no] session-event-module