Руководство Администратора для Cisco Cisco ASR 5000

Скачать
Страница из 62
HeNB Gateway in Wireless LTE Network   
▀  Product Description 
 
 
▄  Cisco ASR 5x00 Home eNodeB Gateway Administration Guide 
16 
   
 
e-RAB management functions 
 
Radio resource management functions 
 
GTP-U tunnels management 
 
Mobility management functions 
 
Security functions 
 
Service and Network access functions 
 
Paging co-ordination functions 
 
UE registration for HeNB 
 
User-plane management functions including ciphering 
Apart from the above listed basic functionalities, the HeNB is also involved in Mobility Management Entity (MME) 
selection when no routing to an MME can be determined from the information provided by the UE. HeNB enforces the 
UL (uplink) bearer level rate based on UE-AMBR and MBR via means of uplink scheduling; and does DL (downlink) 
bearer level rate enforcement based on UE-AMBR (aggregate maximum bit rate). 
Security Gateway (SeGW) 
The Security Gateway is an logical function on HeNB-GW in the LTE femtocell network deployment, however it is 
specified as a requirement in the Femtocell LTE network architecture. It may be implemented either as a separate 
physical entity or co-located with an existing entity. The SeGW secures the communication from/to the HeNBs. 
Basic function of this entity are: 
 
Authentication of HeNBs 
 
Termination of encrypted IPsec data connection from the femtocells 
 
Providing access to HeMS and HeNB-GW 
The SeGW holds capability of implementing a Denial of Service (DoS) shield to protect the EPC (S-GW and MME) by 
detecting and then filtering out the attack traffic while maintaining the QoS (Quality of Service) of useful traffic. In our 
implementation, it is an optional element which is situated on HeNB-GW. 
HeNB Gateway (HeNB-GW) 
The HeNB-GW provides the access to Femto user to LTE core network. It acts as an access gateway to HeNB and 
concentrates connections from a large amount of HeNBs. HeNB-GW serves as a control plane (C-Plane) concentrator,s 
pecifically the S1-MME interface. 
 The HeNB-GW may optionally terminate the user plane towards the HeNB and towards the S-GW, and may provide a 
relay function for relaying User Plane data between the HeNB and the S-GW. The HeNB-GW supports NAS Node 
Selection Function (NNSF). 
Important:
  NAS Node Selection Function (NNSF)supports S1-Flex or multiple S1-MME connections 
towards the EPC from any one HeNB.