Примечания к выпуску для Cisco Cisco Aironet 350 Wireless LAN Client Adapter

You need the following in order to install Install Wizard 1.2 and use its software components:

One of the following Cisco Aironet client adapters:

CB21AG PC-Cardbus card

PI21AG PCI card

A computer running the Windows 2000 or XP operating system

Cisco recommends a 300-MHz (or greater) processor.

Either Service Pack 1 or Service Pack 2 for Windows XP

20 MB of free hard disk space (minimum)

128 MB of RAM or greater (recommended)

If your wireless network uses EAP-TLS or PEAP authentication, Certificate Authority (CA) and 
user certificates for EAP-TLS authentication or CA certificate for PEAP authentication

If your wireless network uses PEAP (EAP-GTC) authentication with a One-Time Password (OTP) 
user database:

A hardware token device from OTP vendors or the Secure Computing SofToken program 
(release 2.1 or later)

Your hardware or software token password

The following information from your system administrator:

The logical name for your workstation (also referred to as client name)

The protocols necessary to bind to the client adapter, such as TCP/IP

The case-sensitive service set identifier (SSID) for your RF network

If your network setup does not include a DHCP server, the IP address, subnet mask, and default 
gateway address of your computer

The wired equivalent privacy (WEP) keys of the access points with which your client adapter 
will communicate, if your wireless network uses static WEP for security

The username and password for your network account

All necessary infrastructure devices (such as access points, servers, gateways, user databases, etc.) 
must be properly configured for any authentication type you plan to enable on the client.