Техническая Инструкция для Cisco Cisco Aironet 350 Wireless LAN Client Adapter
Loading the Aironet Driver on the MS−DOS
Platform
Platform
Document ID: 25106
Contents
Introduction
Prerequisites
Requirements
Components Used
Conventions
Install the DOS Driver for Aironet
Related Information
Prerequisites
Requirements
Components Used
Conventions
Install the DOS Driver for Aironet
Related Information
Introduction
This document explains how to install Cisco Aironet drivers on a Microsoft DOS (MS−DOS)−based laptop.
Prerequisites
Requirements
Cisco recommends that you have knowledge of these topics:
Wireless LAN (WLAN) technology and terms
•
PC hardware topics
•
MS−DOS configuration commands
•
Components Used
The information in this document is based on these software and hardware versions:
Aironet PCM 3xx or LMC 3xx client adapters
•
MS−DOS 6.22
•
Aironet Driver for DOS version 6.22
•
Conventions
Refer to Cisco Technical Tips Conventions for more information on document conventions.
Install the DOS Driver for Aironet
Complete these steps in order to install the DOS driver:
Build the config.sys file in this way:
DEVICE=A:\DOS\HIMEM.SYS
DEVICE=A:\DOS\EMM386.EXE X=D000−DFFF FRAME=NONE
DEVICEHIGH=A:\IBMDSS14.SYS
DEVICEHIGH=A:\IBMDOSCS.SYS
1.