Руководство По Устранению Ошибки для Cisco Cisco Aironet 350 Wireless LAN Client Adapter
Install Windows 2000 Drivers and Utilities for the
Cisco Aironet 340/350 Series Client Adapters
Cisco Aironet 340/350 Series Client Adapters
Document ID: 9214
You need a valid Cisco.com account in order to download Cisco Aironet
drivers, firmware, and utilities. If you do not have a Cisco.com account,
register for free at the Cisco.com Registration page.
drivers, firmware, and utilities. If you do not have a Cisco.com account,
register for free at the Cisco.com Registration page.
Contents
Introduction
Prerequisites
Requirements
Components Used
Conventions
Install the Hardware
Install the PC Card
Install the PCI Client Adapter
Install the Drivers
Install the Utilities
Verify the Installation
Related Information
Prerequisites
Requirements
Components Used
Conventions
Install the Hardware
Install the PC Card
Install the PCI Client Adapter
Install the Drivers
Install the Utilities
Verify the Installation
Related Information
Introduction
This document is an expanded guide to the installation of the Windows 2000 drivers and utilities for the Cisco
Aironet 340 and 350 Wireless LAN Client Adapters. This installation is specifically for legacy versions of
client adapter software that do not use the Install Wizard file. However, if you need the latest bundled file for
Cisco Aironet wireless LAN client adapters that use Windows 98, 2000, Me, NT or XP, go to the Aironet
Client Adapter Installation Wizard (registered customers only) . Refer to Chapter 3 of the Installation and
Configuration Guide for Aironet Client Adapters for more information on how to use the Installation Wizard
to upgrade client software.
Aironet 340 and 350 Wireless LAN Client Adapters. This installation is specifically for legacy versions of
client adapter software that do not use the Install Wizard file. However, if you need the latest bundled file for
Cisco Aironet wireless LAN client adapters that use Windows 98, 2000, Me, NT or XP, go to the Aironet
Client Adapter Installation Wizard (registered customers only) . Refer to Chapter 3 of the Installation and
Configuration Guide for Aironet Client Adapters for more information on how to use the Installation Wizard
to upgrade client software.
Note: The installation methods described here are similar to those used for Windows 95, Windows 98, and
Windows NT. Some key differences exist. Refer to Installing Windows 95 Drivers and Utilities, Installing the
Driver for Windows 98, or Installing the Driver for Windows NT for more information.
Windows NT. Some key differences exist. Refer to Installing Windows 95 Drivers and Utilities, Installing the
Driver for Windows 98, or Installing the Driver for Windows NT for more information.
Prerequisites
Requirements
In order to complete the installation, you need:
A Cisco Aironet 340 or 350 series client adapter card.
•
The Windows 2000 drivers and utilities, which can be found on the CD−ROM that accompanied the
client adapter card or which you can download from the Cisco Wireless Software Center (registered
customers only) .
client adapter card or which you can download from the Cisco Wireless Software Center (registered
customers only) .
•