Примечания к выпуску для Cisco Cisco Aironet 350 Wireless LAN Client Adapter

The AP Scanning drop-down menu contains options that enable you to save and open the AP scan list. 
These two options are available only when the AP Scan List tab is selected. See the 

 for more information.

Count

The number of rows, or access points, in the scan list.

This parameter appears above the AP scan list and to the right.

Network Name

The network name, or service set identifier (SSID), indicates the name of an 
available wireless network. The icon to the left of the SSID provides 
information on link status.

An available wireless network.

The wireless network to which your client adapter is currently 
associated.

The SSID of a Cisco IOS access point appears in the list of available 
networks only if a Guest Mode SSID is enabled or the Broadcast SSID 
in Beacon option is selected. Refer to the software configuration 
guide for your access point for additional information.

MAC Address

The access point’s MAC address.

This field displays the MAC address of the access point’s Ethernet 
port (for access points that do not run Cisco IOS software) or the 
MAC address of the access point’s radio (for access points that run 
Cisco IOS software). The MAC address of the Ethernet port on access 
points that run Cisco IOS software is printed on a label on the back of 
the device.

RSSI

The received signal strength indicator (RSSI) is a measure of signal strength 
in decibels with respect to milliwatts (dBm).

Time of Day

The date and time when the signal strength of each access point was at its 
maximum. They appear in this format: 2005-07-20 16:13:09.

The time is based on a 24-hour clock. 

This field is visible only in Accumulate mode. See the 

 for information 

on the Accumulate mode.