Примечания к выпуску для Cisco Cisco Aironet 350 Wireless LAN Client Adapter
18
Release Notes for Cisco Aironet 350 and CB20A Client Adapter Install Wizard 1.5 for Windows
OL-6553-01
Caveats
Caveats
This section describes open and resolved caveats for the software components in this release.
Open Caveats
Open Driver Caveats
The following caveats are not resolved in PC, LM, and PCI card driver 8.6 and mini PCI and PC-Cardbus
card driver 3.9.
card driver 3.9.
•
CSCec13533—Login delay using Microsoft WPA supplicant
When you activate a host-based EAP profile under Windows XP with Microsoft’s WPA supplicant
(Q815485) installed, it can take up to 90 seconds after login for the Windows desktop to appear and
several minutes for the client to authenticate.
(Q815485) installed, it can take up to 90 seconds after login for the Windows desktop to appear and
several minutes for the client to authenticate.
•
CSCec47650—Dell Inspiron 8000 shuts down when Windows 2000 3D screen saver used
The Dell Inspiron 8000 laptop may shut down upon entering screen saver mode when a 3D screen
saver is used. To work around this problem, choose a non-3D screen saver.
saver is used. To work around this problem, choose a non-3D screen saver.
Open ACU Caveats
The following caveats are not resolved in ACU 6.4.
•
CSCef66051—Intermittent drive mapping with SLP
If you use Service Location Protocol (SLP) to map network drives, you may experience intermittent
mapping problems with your client adapters.
mapping problems with your client adapters.
•
CSCin58253—PEAP login screen takes a long time to display for WPA clients
The PEAP login screen (Static Password or One Time Password) can take up to 3 minutes to display
after you activate a profile that is configured for PEAP and WPA.
after you activate a profile that is configured for PEAP and WPA.
Open Security Module Caveats
The following caveats are not resolved in PEAP security module 1.2.
•
CSCef21799—PEAP supplicant does not support automated Next Token mode with SofToken
The PEAP supplicant does not support automated Next Token mode with SofToken. To work around
this problem when using Next Token mode, copy the PIN from the SofToken application and paste
it into the PEAP window rather than using the automatic SofToken import facility.
this problem when using Next Token mode, copy the PIN from the SofToken application and paste
it into the PEAP window rather than using the automatic SofToken import facility.
•
CSCin32330—Many PEAP login screens appear when computer is left idle
If you leave your computer idle while it is using PEAP authentication, you may receive three PEAP
login screens upon resume. To resolve this problem, cancel the first two login screens and use the
last one (which is on top) to log in.
login screens upon resume. To resolve this problem, cancel the first two login screens and use the
last one (which is on top) to log in.