Примечания к выпуску для Cisco Cisco Aironet 350 Wireless LAN Client Adapter

If your device is running Windows CE 3.0 version 2002 and your RADIUS server account 
specifies a domain, you must enter the domain name in the Wireless Login Module screen. 
To do so, enter the domain name before the username and separate the two with a forward 
slash (e.g., domain/username).

In the Site Survey Tool (SST) utility, the Percent Retries field on the Site Survey - Active 
Mode screen displays the percentage of packets that were retried for transmission. This value 
is calculated as follows: (number of retries x 100) / number of packets sent. If a lot of packets 
get lost, the number of retries could be greater than the number of packets sent. In this case, 
the Percent Retries field would show a value greater than 100%.

Client utility release 2.20 and driver release 2.20 can be used only with Cisco Aironet 340, 350, and 4800 
Series Wireless LAN Client Adapters (PC cards and LM cards) and the following Windows CE devices:

Handheld PC (HPC) running Windows CE 2.11 with an ARM, StrongARM, Mips, SH3, SH4, or x86 
processor

Handheld PC (HPC) running Windows CE 3.0 with an ARM, StrongARM, Mips, SH4, or x86 
processor

Pocket PC (PPC) running Windows CE 3.0 with an ARM, StrongARM, Mips, or SH3 processor

This section describes how to upgrade to client utility release 2.20 and driver release 2.20 for
Windows CE.

The client utilities and help files are installed with the driver.

Cisco recommends that you uninstall the existing driver and client utilities for your client adapter before 
upgrading to more recent versions. This section provides instructions for uninstalling your client 
adapter’s current driver and client utilities. The instructions vary depending on your client adapter’s 
current driver version.